| Material: | Galvanized Steel Wire |
|---|---|
| Cross Sectional Shape: | Round |
| Application: | Concrete Reinforcement |
| Type: | Hookedend |
| Wide in Width: | Diameter 0.55 mm |
| Surface Treatment: | Hot Dipped Galvanized |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Commodity | Type | Diameter mm |
Length mm |
L/D | Cross Section | T. S. min. N/mm2 |
| Hooked-End Steel Fiber
(loose)
|
HF05025 | 0.50 | 25 | 50 | round | 1100-1800 |
| HF05030 | 0.50 | 30 | 60 | |||
| HF05530 | 0.55 | 30 | 55 | |||
| HF05535 | 0.55 | 35 | 65 | |||
| HF06025 | 0.60 | 25 | 40 | |||
| HF06030 | 0.60 | 30 | 50 | |||
| HF06035 | 0.60 | 35 | 60 | |||
| HF07535 | 0.75 | 35 | 50 | |||
| HF07540 | 0.75 | 40 | 55 | |||
| HF07550 | 0.75 | 50 | 65 | |||
| HF07580 | 0.75 | 60 | 80 | |||
| HF09050 | 0.90 | 50 | 55 | |||
| HF09060 | 0.90 | 60 | 65 | |||
| HF10050 | 1.0 | 50 | 50 | |||
| HF10060 | 1.0 | 60 | 60 | |||
| Glued Steel Fiber | GS80/60 | 0.75 | 60 | 80 | round | 1100-1500 |
| GS85/50 | 0.60 | 50 | 85 | |||
| GS60/35 | 0.60 | 35 | 60 | |||
| GS65/35 | 0.55 | 35 | 65 | |||
| Corrugated Steel Fiber | WF05020 | 0.50 | 20 | 40 | round | 1100-1800 |
| WF05030 | 0.50 | 30 | 60 | |||
| WF05530 | 0.55 | 30 | 55 | |||
| CF05535 | 0.55 | 35 | 64 | |||
| CF06030 | 0.60 | 30 | 50 | |||
| CF07530 | 0.75 | 30 | 40 | |||
| CF07535 | 0.75 | 32 | 43 | |||
| CF09050 | 0.90 | 50 | 56 | |||
| CF10050 | 1.0 | 50 | 50 | |||
| Dumbbell Steel Fiber | DS | 1/1.2 x 0.55 | 32/35 | - | rectangle | 700 |
| Crimp Steel Fiber | CS | 0.4-0.8 x 2-2.6 | 38/50 | - | rectangle | 750 |
| Packing | in compound kraft paper bags with inner two in one film bags of 10/20/25Kg net each, 500/1000/1200Kg on pallets | |||||
| Remarks | 1. Most of Steel Fibres conform to ASTM A820 TYPE I standard & CE Certificate EN 14889-1:2006 2. We supply Steel Fibre & Stainless Steel Fibre (1.4301/AISI 304, 1.4841/AISI 314, 1.4845/AISI 310S, 1.4765, 1.4401/AISI 316 etc) according to the buyer's requirements (I.E. length, diameter, width, thickness, higher tensile strength I.E. min 1100-2400 N/mm2 or MPa) |
|||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}